HIGH PERFORMANCE PVC CORE MATERIAL
HXCELL-HX is a high-performance polyvinyl chloride (PVC) rigid foam core with a semi-interpenetrating polymer network (Semi-IPN) structure, achieving an engineered balance between mechanical properties and processability. Compared with conventional linear-structure foam cores, HXCELL-HX significantly improves specific modulus through its unique Semi-IPN architecture. Meanwhile, unlike conventional crosslinked foams, its functional groups and molecular chain mobility are both optimized, endowing the material with superior elongation at break and toughness. The synergy of high modulus and high toughness delivers outstanding machinability: flat panel thickness can be reliably processed down to 0.8 mm, while warpage and other processing defects are reduced. The optimized interpenetrating network substantially shortens the post-curing time, effectively reducing the manufacturing cycle and thus the product delivery lead time. Additionally, thanks to its unique combination of high modulus and high strain capacity, the material exhibits excellent fatigue resistance and impact energy absorption under dynamic loading conditions, with exceptional long-term structural stability. Based on the above performance advantages, HXCELL-HX is widely used in aerospace, marine and yachting, sporting goods, automotive composite components, and industrial manufacturing.
MECHANICAL PROPERTIES
Property | Test Procedure | Unit | Statistical Value | HX45
| HX50 | HX60
| HX80 | HX100 | HX130 | HX200 | HX250 | HX300 |
Density | ISO 845 | kg/m3 | Avg. | 45 | 50 | 60 | 80 | 100 | 130 | 200 | 250 | 300 |
range. | 40-50 | 45-55 | 54-69 | 72-90 | 90-110 | 120-150 | 180-220 | 225-275 | 275-330 |
Compressive Strength | ISO 844:2006 | MPa | Avg. | 0.68 | 0.78 | 1.03 | 1.51 | 2.16 | 3.10 | 5.44 | 7.22 | 9.44 |
Min. | 0.56 | 0.69 | 0.85 | 1.30 | 1.80 | 2.80 | 4.80 | 6.00 | 8.10 |
Compressive Modulus | ISO 844:2006 | MPa | Avg. | 48.2 | 63.5 | 90.8 | 119 | 180 | 206 | 353 | 420 | 599 |
Min. | 36.0 | 50.0 | 75.0 | 103 | 150 | 180 | 300 | 360 | 530 |
| Tensile Strength | ASTM C297 | MPa | Avg. | 0.96 | 1.36 | 1.88 | 2.41 | 3.51 | 4.25 | 6.62 | 7.34 | 8.60 |
Min. | 0.84 | 1.02 | 1.70 | 2.20 | 3.00 | 3.50 | 5.50 | 6.20 | 7.45 |
Tensile Modulus | ASTM C297 | MPa | Avg. | 72 | 79 | 96 | 130 | 150 | 186 | 341 | 386 | 412 |
Min. | 63 | 70 | 87 | 110 | 130 | 155 | 270 | 305 | 320 |
Shear Strength | ISO 1922:2012 | MPa | Avg. | 0.55 | 0.70 | 0.79 | 1.15 | 1.57 | 2.18 | 3.40 | 4.51 | 5.62 |
Min. | 0.47 | 0.59 | 0.70 | 1.00 | 1.35 | 1.80 | 3.15 | 3.90 | 5.00 |
| Shear Modulus | ISO 1922:2012 | MPa | Avg. | 16 | 20 | 23 | 32 | 42 | 54 | 90 | 123 | 152 |
Min. | 14 | 16 | 20 | 27 | 33 | 48 | 75 | 105 | 130 |
Note: The above values are average results obtained from routine production testing.
PRODUCT CHARACTERISTICS
l SEMI-IPN STRUCTURE: High strength-to-weight ratio, excellent stiffness, and high impact resistance for dynamic load applications.
l EXCELLENT CHEMICAL RESISTANCE: Compatible with a wide range of resin systems, including epoxy and unsaturated polyester resins.
l CLOSED-CELL STRUCTURE: Provides low resin absorption, low water absorption, thermal insulation, sound insulation, and dielectric transparency.
l SELF-EXTINGUISHING PROPERTY: Suitable for applications requiring enhanced fire safety and higher performance standards.
TECHNICAL CHARACTERISTICS
Characteristics | Test Procedure | Unit | HX45 | HX50 | HX60 | HX80 | HX100 | HX130 | HX200 | HX250 | HX300 |
Thermal Conductivity (20°C) | EN 12667 | W/(m-K) | 0.028 | 0.028 | 0.029 | 0.031 | 0.033 | 0.037 | 0.044 | 0.049 | 0.055 |
| Coefficient of Linear Thermal Expansion | ISO 4897 | x10^-6/℃ | 40 | 40 | 40 | 40 | 40 | 40 | 40 | 40 | 40 |
| Heat Deflection Temperature | DIN 53424 | °C | 125 | 125 | 125 | 125 | 125 | 125 | 125 | 125 | 125 |
Maximum Continuous Service Temperature
| / | °C
| 80 | 80 | 80 | 80 | 80 | 80 | 80 | 80 | 80 |
Dissipation Factor | ASTM D 2520 | / | 0.0002 | 0.00024 | 0.0003 | 0.0005 | 0.0006 | 0.0009 | 0.0015 | 0.0019 | 0.0024 |
| Dielectric Constant | ASTM D 2520
| /
| 1.05 | 1.05 | 1.06 | 1.08 | 1.11 | 1.14 | 1.23 | 1.28 | 1.34 |
PoissonIs Ratio | ASTM D638-22
| / | 0.4 | 0.4
| 0.4 | 0.4 | 0.4 | 0.4 | 0.4 | 0.4 | 0.4 |
*Note: The above data are average values from routine production testing. Continuous service temperature: -200°C to +80°C. For high-temperature or sustained load applications, please contact us for design support.Maximum processing temperature depends on time, pressure and process conditions; recommended limit under normal conditions is 110°C.